Toggle menu
410-276-7617
  • 0
  • General Lighting
  • Exit and Emergency Lighting
  • LED Retrofit
  • Replacement Lenses
  • Shop by Brand
  • View all Brands
  • General Lighting
  • Exit and Emergency Lighting
  • LED Retrofit
  • Replacement Lenses

    • Shop by Brand

  • View all Brands

    • Exit and Emergency Lighting

    • Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one or two lamps in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 700 lumens. Dual 120/277 voltage. Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 3.6V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuit protection. Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation.
      Quick view

      FLUORESCENT EMERGENCY BALLAST 700 LUMENS BAL700TD

      Product Specs Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting.Operates one or two lamps in the emergency mode for a minimum of 90-minutes.Provides a maximum initial lumen output of...
    • Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting. Operates one lamp in the emergency mode for a minimum of 90-minutes. Provides a maximum initial lumen output of 500 lumens. Dual 120/277 voltage. Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing. 2.4V long life, maintenance-free, rechargeable sealed NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp for minimum 90-minute emergency illumination. Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours. Time delay enhancement to overcome end-of-life circuit protection. Suitable for installation inside, on top or in remote* of the fixture. Can be used in both switched and unswitched fixtures. UL Listed for factory or field installation.
      Quick view

      FLUORESCENT EMERGENCY BALLAST 500 LUMENS BAL500TD

      Product Specs Works with or without an AC ballast to convert new or existing fluorescent fixtures in to unobtrusive emergency lighting.Operates one lamp in the emergency mode for a minimum of 90-minutes.Provides a maximum initial lumen output of 500...
    • Provides constant power output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD. Universal 120-277V, 50/60 Hz input. Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing. Long-life, maintenance free, rechargeable NiCad battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range. 24 Hour maximum battery recharge time. Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. Provided with 2' flex conduit. Provides constant power output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD. Universal 120-277V, 50/60 Hz input. Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing. Long-life, maintenance free, rechargeable NiCad battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range. 24 Hour maximum battery recharge time. Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. Provided with 2' flex conduit.
      Quick view

      CONSTANT-POWER EMERGENCY LED DRIVER BLEDEM-CP

      Product Specs Provides constant power output to the load during emergency mode operation.Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD.Universal 120-277V, 50/60 Hz input.Charge/Power "ON" LED indicator light and push-to-test switch for...
    • Provides constant current (350 or 500 mA) output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD. Universal 120-277V, 50/60 Hz input. Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing. Long-life, maintenance free, rechargeable NiCad battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range. 24 Hour maximum battery recharge time. LED emergency driver is equipped with a switch to choose 350mA or 500mA constant current output. Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish. Provides constant current (350 or 500 mA) output to the load during emergency mode operation. Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD. Universal 120-277V, 50/60 Hz input. Charge/Power "ON" LED indicator light and push-to-test switch for mandated code compliance testing. Long-life, maintenance free, rechargeable NiCad battery. Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault. 90 Minute minimum emergency operating time over full temperature range. 24 Hour maximum battery recharge time. LED emergency driver is equipped with a switch to choose 350mA or 500mA constant current output. Output classification: Class 2 Compliant. Surge protection: Per C62.41 (TVS). Input overcurrent protection: Fusible link. LED illuminated and remote mounted test switch. Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in a black finish.
      Quick view

      CONSTANT-CURRENT EMERGENCY LED DRIVER BLEDEM-CC

      Product Specs Provides constant current (350 or 500 mA) output to the load during emergency mode operation.Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD.Universal 120-277V, 50/60 Hz input.Charge/Power "ON" LED indicator light and...
    • Midsize-electrical inverter systems for powering 375 up to 600 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. All models are designed for fast, easy wall mounting. Input Voltages: Universal 120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) Input Frequencies: 60Hz ±2% Input Surge Protection: Meets UL924 Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Efficiency Rating: 98% at full rated load (line) Waveform: Sinusoidal (digitally controlled, PWM design) Static Voltage: ± 5% during battery discharge. 0-100% amps maximum Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Transfer Time: Less than 1.0 second Output Protection: Inverter fuse Load Power Factor Range: 0.44 Lead to 0.44 Lag Minimum Loading: 0% of rated system capacity Output Protection: Circuit breaker Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory. Midsize-electrical inverter systems for powering 375 up to 600 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. All models are designed for fast, easy wall mounting. Input Voltages: Universal 120 or 277VAC, 60Hz (User selectable with (2) wire jumpers provided) Input Frequencies: 60Hz ±2% Input Surge Protection: Meets UL924 Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Efficiency Rating: 98% at full rated load (line) Waveform: Sinusoidal (digitally controlled, PWM design) Static Voltage: ± 5% during battery discharge. 0-100% amps maximum Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Transfer Time: Less than 1.0 second Output Protection: Inverter fuse Load Power Factor Range: 0.44 Lead to 0.44 Lag Minimum Loading: 0% of rated system capacity Output Protection: Circuit breaker Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory.
      Quick view

      EMERGENCY POWER SYSTEMS LPS SERIES

      Product Specs Supplemental Spec Sheet 1: Supplemental Spec Sheet 2: Sizzle Sheet Midsize-electrical inverter systems for powering 375 up to 600 watts of incandescent, fluorescent, induction orLED lighting loads. Pulse width modulated (PWM) output design...
    • Mini-electrical inverter systems for powering up to 220W/250VA of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required. fixtures. MPS models support Normally-ON, Normally-OFF or SWITCHED operation. Input Voltages: 120 or 277VAC field selectable. Input Frequencies: 60Hz ±2% Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Waveform: Sinusoidal (digitally controlled, PWM design) Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Output Protection: Inverter fuse Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory. Mini-electrical inverter systems for powering up to 220W/250VA of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required. fixtures. MPS models support Normally-ON, Normally-OFF or SWITCHED operation. Input Voltages: 120 or 277VAC field selectable. Input Frequencies: 60Hz ±2% Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Waveform: Sinusoidal (digitally controlled, PWM design) Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Output Protection: Inverter fuse Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory.
      Quick view

      EMERGENCY POWER SYSTEMS SPS SERIES

      Product Specs Supplemental Spec Sheet 1: Supplemental Spec Sheet 2: Sizzle Sheet: Supplemental Spec Sheet 4: Mini-electrical inverter systems for powering up to 220W/250VA of incandescent, fluorescent, induction or LEDlighting loads. Pulse width...
    • MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid mount models are designed for easy installation either on or near controlled fixtures. MPS models support Normally-ON, Normally-OFF or SWITCHED operation. Input Voltages: 120 or 277VAC field selectable. Input Frequencies: 60Hz ±2% Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Waveform: Sinusoidal (digitally controlled, PWM design) Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Output Protection: Inverter fuse Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory. MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid mount models are designed for easy installation either on or near controlled fixtures. MPS models support Normally-ON, Normally-OFF or SWITCHED operation. Input Voltages: 120 or 277VAC field selectable. Input Frequencies: 60Hz ±2% Input Protection: Provided by Service Panel, Rated 20A max. Output Voltages: (60Hz) 120 or 277VAC Waveform: Sinusoidal (digitally controlled, PWM design) Output Frequencies: 60Hz. ±0.3Hz during emergency cycle Output Distortion: Less than 3% THD (linear load) Output Protection: Inverter fuse Heavy duty steel cabinet is finished in white baked-on powder paint providing scratch and corrosion resistance. Optional special color paint (-SP) finishes are available, consult factory.
      Quick view

      EMERGENCY MICRO POWER SYSTEMS MPS SERIES

      Product Specs Supplemental Spec Sheet 1: Supplemental Spec Sheet 2: MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent,fluorescent or LED fixtures of between 20 and 55 watts.Surface, recessed or...
    • For use with lighting equipment, communications and electrical equipment, emergency lighting equipment and fire alarm & security systems. Valve-regulated and safe to discharge in any position. Completely sealed and maintenance free, low self-discharge. Impact-resistant ABS housing. Will last up to 5 years in standby applications and 200 to 1,000 cycles in cyclic applications depending on depth of discharge. Available in a variety of sizes and amp ratings. Provides reliable power output in a variety of applications, resulting in greater efficiency and improved ability to recover from deep discharge. Cycle or standby use. Low resistance safety feature makes the batteries easy to recharge & maximizes energy output. Standard F1 or F2 “flat lugs” type terminal.
      Quick view

      RECHARGEABLE SEALED LEAD ACID BATTERIES BL6/BL12

      Product Specs For use with lighting equipment, communications and electrical equipment, emergency lighting equipment and fire alarm & security systems.Valve-regulated and safe to discharge in any position.Completely sealed and maintenance free, low...
    Compare Selected